Panasonic WJ-GXE500 설치 매뉴얼 - 페이지 26

{카테고리_이름} Panasonic WJ-GXE500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WJ-GXE500 32 페이지. Ip video cameras
Panasonic WJ-GXE500에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Start the Panasonic IP setting software.

Click the [IP setting] button after selecting the

MAC address/IP address of the unit to be con-

figured.

Note:

• When using a DHCP server, the IP address

assigned to the unit can be displayed by click-

ing the [Refresh] button of the IP setting soft-

ware.

• When a duplicate IP address is used, the corre-

sponding MAC address/IP address will be dis-

played shaded.

Complete each network setup item and click

the [Apply] button.

Note:

• When using a DHCP server, it is possible to set

"DNS" to "AUTO".

Important:

• It may take for around 2 minutes to complete to upload the settings to the unit after clicking the

[Apply] button. The settings may be invalidated when the 12 V DC power supply is cut or when

the AC adaptor or the LAN cable is disconnected before completing the upload. In this case,

perform the settings again.

• When using a firewall (including software), allow access to all UDP ports.