Panasonic WV-NP304 사용 설명서 - 페이지 4

{카테고리_이름} Panasonic WV-NP304에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-NP304 20 페이지. Ip video cameras
Panasonic WV-NP304에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 브로셔 (2 페이지), 사용 설명서 (20 페이지), 참조 (2 페이지), 비교 차트 (6 페이지), 설치 매뉴얼 (36 페이지), 사용 설명서 (20 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Monitor images on a PC

The following are descriptions of how to monitor images from the camera on a PC.

Monitor images from a single camera

Step 1

Start up the web browser.

Step 2

Enter the IP address designated using the Panasonic IP

setup software in the address box of the browser.

Example when entering an IPv4 address:

http://192.168.0.10

Example when entering an IPv6 address:

http://URL registered using IPv6 address

http://[IPv6 address]

Important:

• When the HTTP port number is changed from "80",

enter "http://IP address of the camera + : (colon) +

port number" in the address box of the browser, for

example, "http://192.168.0.11:8080".

• When the PC is in a local network, configure the

proxy server setting of the web browser (under

"Internet Options..." under "Tools" of the menu bar)

to bypass the proxy server for the local address.

Step 3

Press the [Enter] key on the keyboard.

→ The "Live" page will be displayed.

When "On" is selected for "User authentication", the

authentication window will be displayed before dis-

playing live images for the user name and password

entries. The default user name and password are as

follows.

User name: admin

Password: 12345

Important:

• To enhance the security, change the password for

the user "admin". It is recommended to change this

password periodically.

• When displaying multiple MPEG-4 images on a PC,

images may not be displayed depending on the per-

formance of the PC.

Notes:

• Up to 16 users can access the camera concurrently

regardless of the image type (JPEG/MPEG-4) that

the current access users are monitoring. Depending

on the set values for "Bandwidth control(bit rate)"

and "Max bit rate (per client)", the maximum concur-

rent access number may be less than 16 users.

When 16 users are concurrently accessing, the

access limit message will be displayed for users who

subsequently attempt to access. When "Multicast" is

selected for "Transmission type" of "MPEG-4", users

who are monitoring MPEG-4 images will not be limit-

ed to access.

• When "On" is selected for "MPEG-4 transmission"

( Setup Instructions), an MPEG-4 image will be

displayed. When "Off" is selected, a JPEG image will

be displayed. It is possible to display a JPEG image

even when "On" is selected for "MPEG-4 transmis-

sion". In this case, the refresh interval will be limited.

• The refresh interval of JPEG images will be limited

to 15 fps at the maximum when transmitting JPEG

and MPEG-4 images simultaneously even when a

frame-rate-prioritized bit rate is selected at "Max bit

rate (per client)" of "MPEG-4".