Panasonic WV-NP502 설치 매뉴얼 - 페이지 14
{카테고리_이름} Panasonic WV-NP502에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-NP502 32 페이지. Ip video cameras
Panasonic WV-NP502에 대해서도 마찬가지입니다: 비교 차트 (6 페이지), 통합 참고 사항 (8 페이지)
페이지 인쇄
Major operating controls and their functions
<Side view>
<Rear view>
Network connector
Access LED (blinking at accessing)
Link LED (lighting at linking)
Monitor for adjustment
EXT I/O terminals
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Before initializing the settings, it is recommended to write down the settings in
advance.
14
Slide cover
ABF
SDCARD LOCK
Auto-back-focus button
Output connector
ALC lens connector
SDHC/SD memory card slot
Clamp for SDHC/SD memory card
10BASE T/100BASE-TX
AUDIO OUT
MIC/LINE IN
INITIAL
SET
ACT
LINK
POWER
SD CARD/ABF
MONITOR OUT
12V = IN
EXT I/O
GND 4 3 2 1
ALARM IN 1/DAY/NIGHT IN
ALARM IN 3/
AUX OUT/EXPOSURE OUT
ALARM IN 2/ALARM OUT
W
Lens (option)
W
Tripod mount base
Audio output connector
Microphone/line input connector
INITIAL SET button
Power LED
12 V DC power cable terminals
SDHC/SD memory card error
LED/ABF LED (Blinks when
ABF is being performed.)