Panasonic WV-NP502 설치 매뉴얼 - 페이지 27

{카테고리_이름} Panasonic WV-NP502에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-NP502 32 페이지. Ip video cameras
Panasonic WV-NP502에 대해서도 마찬가지입니다: 비교 차트 (6 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

1. Configure the Network Settings

Start the Panasonic IP setting software.

Click the [IP setting] button after selecting the

MAC address/IP address of the camera to be

configured.

Note:

• When using a DHCP server, the IP address

assigned to the camera can be displayed by

clicking the [Refresh] button of the IP setting

software.

• When a duplicate IP address is used, the corre-

sponding MAC address/IP address will be dis-

played shaded.

Complete each network setup item and click

the [Apply] button.

Note:

• When using a DHCP server, it is possible to set

"DNS" to "AUTO".

Important:

• It may take for around 2 minutes to complete to upload the settings to the camera after clicking

the [Apply] button. The settings may be invalidated when the 12 V DC power supply is cut or

when the LAN cable is disconnected before completing the upload. In this case, perform the

settings again.

• When using a firewall (including software), allow access to all UDP ports.