Panasonic WV-SP509 설치 매뉴얼 - 페이지 28

{카테고리_이름} Panasonic WV-SP509에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SP509 36 페이지. Ip video cameras
Panasonic WV-SP509에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (40 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

When using PoE (IEEE802.3af compliant)

Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)

and the network connector of the camera.

* For Europe.

IMPORTANT:

• Use all 4 pairs (8 pins) of the LAN cable.

• The maximum cable length is 100 m {328 feet}.

• Make sure that the PoE device in use is compliant with IEEE802.3af standard.

• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V

DC will be used for power supply. Depending on the PoE device used, the power supply lamp

may not light and the network connections may not be possible. In this case, disable the PoE

device setting, and refer to the operating instructions of the PoE device in use.

• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When

the cable is quickly connected, the power may not be supplied from the PoE device.

Connection example when connecting to a network using a

PoE hub

SP509

)

SP509

)

LAN cable (category 5 or better, straight, STP*)

* For Europe

IMPORTANT:

• The video monitor is used for checking the adjustment of the angular field of view when install-

ing the camera or when servicing. It is not provided for recording/ monitoring use.

• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.

• Power supply is required for each network camera. When using a PoE device (hub), 12 V DC

power supply is unnecessary.

SP509

PoE device (hub)

or better, straight, STP*)

better, straight, STP*)

LAN cable