Panasonic WV-SW316L 설치 매뉴얼 - 페이지 40

{카테고리_이름} Panasonic WV-SW316L에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SW316L 50 페이지. Ip video cameras
Panasonic WV-SW316L에 대해서도 마찬가지입니다: 사양 (2 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Configure the network settings

Configure the network settings of the camera using the

Panasonic IP setting software

It is possible to perform the network settings of the camera using the IP setup software on the pro-

vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of

each camera independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera

and the PC individually on the "Network" page of the setup menu. Refer to the Operating

Instructions (included in the CD-ROM) for further information.

IMPORTANT:

• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"

window may be displayed when starting the IP setup software. In this case, disable "User

Account Control" from the control panel.

• For the security enhancement, the MAC address/IP address of the camera to be configured will

not be displayed when around 20 minutes have passed after turning on the power of the cam-

era. (When the effective period is set to "20min" in the IP setup)

However cameras in the initial set mode are still displayed even after 20 minutes.

• Panasonic IP setting software is inoperable in other subnets via the same router.

• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).

T o start the Panasonic IP setting software, click the [Run] button next to [IP Setting Software]

from the CD launcher menu window, or double-click on the shortcut icon created after install-

ing the software on the PC.

• The License Agreement will be displayed. Read

the Agreement and choose "I accept the term

in the license agreement", and click [OK].

C lick the [Network Settings] button after select-

ing the MAC address/IP address of the camera

to be configured.

Note:

• When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the

[Search] button of the IP setting software.

• When a duplicate IP address is used, the corresponding camera number will be displayed shaded.

• When the [Access Camera] button is clicked, live images of the selected camera will be displayed.

• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in

accordance with the protocol in use.

• The information displayed can be sorted by clicking the title of each displayed item.