Panasonic WV-SW395 설치 매뉴얼 - 페이지 29

{카테고리_이름} Panasonic WV-SW395에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SW395 40 페이지. Ip video cameras
Panasonic WV-SW395에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 비교 차트 (6 페이지), 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (40 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Step 1

Start the Panasonic IP setting software by double-clicking

the "EasyIpSetup.exe" icon on the provided CD-ROM.

The License Agreement will be displayed. Read the

Agreement and choose "I accept the term in the license

agreement", and click "OK".

Step 2

Click the [Network Settings] button after selecting the

MAC address/IP address of the camera to be configured.

Note:

• When using a DHCP server, the IP address assigned

to the camera can be displayed by clicking the

[Search] button of the IP setting software.

• When a duplicate IP address is used, the correspond-

ing camera number will be displayed shaded.

• When the [Access Camera] button is clicked, live

images of the selected camera will be displayed.

• It is possible to change the "Camera list" display

between IPv4 addresses and IPv6 addresses in

accordance with the protocol in use.

Important:

• It may take for around 2 minutes to complete to upload the settings to the camera after clicking the [Save] button. The

settings may be invalidated when the 24 V AC power supply is cut or when the AC adaptor or the LAN cable is dis-

connected before completing the upload. In this case, perform the settings again.

• When using a firewall (including software), allow access to all UDP ports.

Step 3

Complete each network setup item and click the [Save]

button.

Note:

• When selecting "DHCP" or "AutoIP", it is possible to

set "DNS" to "Auto".