Panasonic WV-SW396 설치 매뉴얼 - 페이지 28
{카테고리_이름} Panasonic WV-SW396에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SW396 40 페이지. Ip video cameras
Panasonic WV-SW396에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (40 페이지), 양이온 (2 페이지), 통합 참고 사항 (8 페이지)
페이지 인쇄
When connecting to a network using a PoE+ hub
* When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC
power supply.
<Required cable>
LAN cable (category 5e or better, straight, STP*)
* For Europe
Powered speaker (option)
Plug-in power type
microphone (option)
Powered speaker (option)
Plug-in power type
microphone (option)
Important:
• The video monitor is used for checking the adjustment of the angular field of view when installing the camera or when
servicing. It is not provided for recording/monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX or better. (When supplying the power
to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a
PoE hub or router that is compliant with IEEE802.3af standard.
• If a PoE+ device (hub) is not used, each network camera must be connected to a power supply.
• When using 24 V AC, power supply from a PoE (or PoE+) hub or router is not required.
28
Video monitor
(for adjustment use only)
RJ-45 female connector
(cable integrated type)
LAN cable (category 5e or
better, straight, STP*)
RJ-45 female connector
(cable integrated type)
Hub, router
PoE+ (IEEE802.3at compliant) is applied when the power is supplied.
To the power supply
(24 V AC)
LAN cable (category 5e or
better, straight, STP*)
(for adjustment use only)
To the power supply
(24 V AC)
LAN cable (category 5e or
better, straight, STP*)
PC
Video monitor