Panasonic WV-SW559 설치 매뉴얼 - 페이지 24

{카테고리_이름} Panasonic WV-SW559에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SW559 48 페이지. Ip video cameras
Panasonic WV-SW559에 대해서도 마찬가지입니다: 사양 (2 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Connection

Caution:

• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED

POWER SOURCE (IEC/EN/UL/CSA 60950-1).

Before starting the connection, turn off the power of this camera and the devices to be connected.

Check and prepare the required devices and cables for connection.

Note:

• When using the mount bracket (accessory), it is possible to connect the cables after mounting

the camera onto the mount bracket.

• Refer to page 19 when connecting the conduit.

Connect the microphone/line input cable and the microphone (for use of the audio reception

function).

SW559

Input impedance:

Recommended cable length: Less than 1 m {3.28'} (for microphone input)

Recommended microphone: Plug-in power type microphone (option)

Supply voltage:

Recommended sensitivity of microphone: −48 dB ±3 dB (0 dB=1 V/Pa,1 kHz)

IMPORTANT:

• Connect/disconnect the external speaker cables or audio/video cables after turning off the

power of the camera and the amplifier. Otherwise, loud noise may come out from the speaker.

Network cable

RJ-45 (female)

Alarm input/output cable 4P alarm cable (accessory)

Power cable

(12 V DC)

Microphone/line input cable (white)

Audio output cable (black)

2 kΩ±10 %

Less than 10 m {32.8'} (for line input)

Connect a monaural mini plug (ø3.5 mm).

2.5 V ±0.5 V

LAN cable (category 5 or better)

2P power cable (accessory)

SW559

12 V DC (red)

GND (black)

Power cable

12 V DC

Red

Positive

Black

Negative