Panasonic WVNP244 - COLOR CCTV CAMERA 사용 설명서 - 페이지 14

{카테고리_이름} Panasonic WVNP244 - COLOR CCTV CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNP244 - COLOR CCTV CAMERA 24 페이지. Ip video cameras
Panasonic WVNP244 - COLOR CCTV CAMERA에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 사용 설명서 (24 페이지), 매뉴얼 (2 페이지), 사용 설명서 (24 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Panasonic WVNP244 - COLOR CCTV CAMERA 사용 설명서

1. Installations/Connections

Installations/Connections

Before start the installation/connection, prepare the required devices and cables.

Before starting the connection, turn the power of the devices including the camera and the PC

off or disconnect the AC adapters from the outlet.

Step 1

Fix an optional camera mount base onto the

desired place and mount the camera on it.

When attaching an optional camera mount

base on the bottom of the camera, use the

removed screws to attach the camera mount

base.

Otherwise, it may cause a drop or malfunc-

tion.

Tripod mount base

Important:

Method of installation may be different

depending on the material of the place

where the camera is to be installed.

Step 2

Connect the monaural mini plug (ø3.5 mm) to

the monitor out connector (for adjustment) on

the rear of the camera. (Only when adjusting

the angular field of view)

Fixing screw

Connect to the video

monitor, etc.

Important:

The monitor out connector is provided

only for checking the adjustment the

angular field of view on the video monitor

when installing the camera or when serv-

icing.

It is not provided for recording/monitor-

ing use.

Step 3

Connect the power cable.

• When using AC 24 V/DC 12 V power

supply

EXT I/O

CARD

1 2 3 4

POWER

GND

AC 24V IN : 1L – 2N

DC 12V IN : ! – @

GND wire

• When using PoE (Power over Ethernet:

IEEE802.3af compliant)

Connect a LAN cable (category 5 or bet-

ter) between a PoE device (such as a

PoE hub) and the network connector of

the camera.

10BASE-T/

MONITOR OUT

LINK

100BASE-TX

ACT

INITIAL SET