Panasonic WVNS954 - NETWORK CAMERA 사양

{카테고리_이름} Panasonic WVNS954 - NETWORK CAMERA에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNS954 - NETWORK CAMERA 2 페이지. Ip video cameras
Panasonic WVNS954 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (21 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 설치 매뉴얼 (31 페이지), 통합 참고 사항 (8 페이지), 사용 설명서 (21 페이지)

페이지 인쇄

Dome Network camera featuring 30x zoom and Super Dynamic III

Key Features

• Super Dynamic III technology delivers 128x wider dynamic range

compared to conventional cameras.

• High sensitivity with Day-Night function: 0.5 lux (Color) at F1.4 (WIDE), 0.04 lux (B/W) at F1.4

(WIDE). IR cut filter switches on and off to ensure optimal picture quality in both color and B/W.

• Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integration

ensures reduced noise and motion blur in various conditions.

• Electronic sensitivity enhancement: Auto (Up to 32x) / OFF

• 30x zoom lens: 3.8 mm ~ 114 mm (approx. 300x with digital zoom)

• Pan/Tilt speed of max. 400°/s at preset mode and 0.065°/s super fine control at manual mode

• 5 degrees upper view for various applications

• Auto tracking: The camera automatically pans and tilts to follow a

moving subject and keep it in the center of the image.

• Built-in Video Motion Detector with 4 programmable detection areas and 6 sensitivity levels

• Scene Change Detection alarms when lens is covered, spray painted, removed or defocused.

• Various I/O terminals: ALARM IN 1 / BW IN, ALARM IN 2 / ALARM OUT, ALARM IN 3 / AUX OUT

• Alarm sources include Terminal 1 ~ 3, VMD and Panasonic alarm command. Alarm actions include

Preset positions 1 ~ 256, PATROL 1 ~ 4, SD memory recording, FTP image transfer, E-mail

notification, Indication on browser, Terminal output, Panasonic protocol output and Auto track.

• Auto image stabilizer for applications where vibration or wind is a concern

• Camera title display: 16 alphanumerics OSD and 20 alphanumerics on the browser

• Digital Slip-ring Transmission: The high speed digital video signal supplied

by the Super Dynamic III DSP travels through the compact slip-ring

without any DA/AD conversion process preventing image quality loss.

• Built-in MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips

• MPEG-4 and JPEG dual stream output for simultaneous live

monitoring and high resolution recording

• Progressive output with motion adaptive interlace/progressive conversion

allows every image to be clear even when the object is moving.

• PTZ control can be made on the user-friendly GUI with 16 speeds

pan/tilt and new "Drag and Zoom" operation enabling finer control.

256 speeds available for system with WV-CU950 system controller.

• 360° map shot: 8 thumbnail images at 45° intervals make it simple to

direct the camera by clicking on a thumbnail.

Day-Night Dome Network Camera

WV-NS950

WV-NS954

(24 V AC)

• Built-in network interface (10Base-T / 100Base-TX)

• Multiscreen: Image from 16 cameras can be displayed in 4 different

Quad screens or 16-screen (JPEG only).

• FTP client function enables periodic image data transfer or transfer upon alarm.

• Alarm notification via e-mail

• Max bit rate/client (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) or frame

rate priority mode (4,096 kbps / Unlimited) for MPEG-4 and Total bit rate control (64 / 128 /

256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.

• Full duplex 2-way audio allows interactive communication between

camera site and monitoring site.

• Alarm log, Manual REC log, FTP error log saved in the SD memory card

is displayed on the browser GUI and can be downloaded to the client

PC. Playback or Image data download through the log is also available.

• Multi-language GUI and setup menu: English, French, Italian, Spanish, German,

Russian (PAL), English, French (NTSC), (Installation required except for English).

• SD memory card slot for Manual recording, Alarm recording and Backup upon network failure

• Scheduling function for Alarm / VMD / Access permission, Preset

position call and Position refresh

Standard Accessories

• Operating Instructions ................... 1 pc.

• CD-ROM ....................................... 1 pc.

The IP setup software, the viewer software

and the network operating instructions

(PDF) are included on the CD-ROM.

Optional Accessories

Ceiling

Embedded Ceiling

Pendant

Mount Bracket

WV-Q105

WV-Q116

WV-Q117

Super Dynamic III

Series

WV-NS950

(220 ~ 240 V AC)

WV-NS954

(24 V AC)

The following items are for installation.

• Decorative Cover .......................... 1 pc.

• Dust Protection Sheet ................... 1 pc.

• 8P Alarm Cable ............................. 1 pc.

• Connector for 24 V AC (only for WV-NS954) ..... 1 pc.

• RJ-45 junction connector .............. 1 pc.

Wall

Smoke

Mount Bracket

Dome Cover

WV-Q118

WV-CS3S