3B SCIENTIFIC PHYSICS U40110 사용 설명서 - 페이지 3
{카테고리_이름} 3B SCIENTIFIC PHYSICS U40110에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3B SCIENTIFIC PHYSICS U40110 12 페이지. Multiple beam lamp
페이지 인쇄
3B SCIENTIFIC® PHYSICS
Operating instructions
1/03 ALF
1
2
3
2
4
The multiple beam lamp allows numerous demonstra-
tions in the areas of ray and wave optics when used
with the equipment set for optics on magnetic boards,
basic set (U14600) and supplementary set (U14601). The
demonstrations include casting of shadows, chromat-
ics, reflection laws, refraction laws, total reflection,
minimum angle of deflection in a prism, ascertaining
the focal length of mirrors and lenses, lens laws and
aberrations.
1. Safety instructions
• Caution: Lamps heat up during extended periods
of operation.
• Do not touch the glass bulb of the lamp with your
bare hands when changing the bulb, for example.
Lamp bulbs are clouded by fat deposits on the
skin.
2. Description, technical data
The device comprises a halogen lamp in a metal hous-
ing lined with magnetic foil. The light source emits up
to 5 narrow beams which are deflected by rotary mir-
rors so as to emerge parallel, convergent or divergent.
Up to 2 divergent light beams whose area of overlap
can be adjusted by means of mirrors are available on
the rear of the multi-beam lamp.
Lamp:
12V, 55W
Power cable: 1.5 m long with a 4-mm plug
U40110 Multiple Beam Lamp
1
5
1
1
1
Rotary mirror for focused, parallel light beams
2
Rotary mirror for divergent light beams
3
Protective cover
4
Electrical power cable with a 4-mm plug
5
Central ray
Dimensions:
150 mm x 200 mm x 50 mm
Weight:
0.9 kg
2.1 Accessories:
U40113 Spare halogen light for the multiple beam lamp
U40110.
3. Procedure
3.1 Setting a parallel light beam
•
Attach the lamp to the board.
•
Plug the lamp into a power supply unit, for in-
stance, U11735.
•
Adjust the beam via rotary mirror 1.
3.2 Setting a divergent light beam
•
Attach the lamp to the board.
•
Plug the lamp into a power supply unit, for in-
stance, U11735.
•
Adjust the beam via rotary mirror 2.
3.3 Changing bulbs
•
Loosen the screws, remove the round protective
cover (A) and the spacers.
•
Remove the flat plug (E), loosen the knurled screws
(B), remove the plate (C) and the lamp (D).
•
Insert a new lamp. Fasten the plate again with
knurled screws such that the lamp can still be
moved.
•
Do not touch the glass bulb of the lamp with your
bare hands when changing it. Lamp bulbs are
3
®