Panasonic CT-13R28 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Panasonic CT-13R28에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CT-13R28 4 페이지. 13" diagonal monitor-receiver

페이지 인쇄

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which allows channels to skip up or down to the

next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal

VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an

antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu

option is in the CATV setting.

"TO MEMORIZE CHANNELS" cannot be selected if the AV mode is selected.

TV/CATV SELECTION

Press ACTION and press

select the SET UP mode, then press

ACTION.

Press

to select MODE mode and then press

to select the TV or CABLE mode, then press ACTION.

Press ACTION twice.

NOTE:

Contact your cable company to determine the type of cable system used in your area.

AUTOMATIC CHANNEL MEMORY

Press ACTION and press

select the SET UP mode, then press

ACTION.

Press

twice to select AUTO PROGRAM mode and then press

The TV will begin memorizing all the channels available in your area.

Press ACTION twice.

MANUAL CHANNEL MEMORY

Press ACTION and press

select the SET UP mode, then press

ACTION.

Press

twice to select MANUAL PROGRAM mode and then press .

Select the desired channels to be added or deleted using Direct

Channel Selection (10 keys. 0-9), CH

Press

to select ADD or DELETE.

If an unmemorized channel was selected (step 3), the channel

indicator will be yellow. Press

unmemorized channel. The channel indicator will change from yellow

to blue when a channel is added and the channel will be memorized.

If a memorized channel was selected (step 3), the channel indicator

will be blue.

Press

if you wish to DELETE the channel from memory. The

channel indicator will change from blue to yellow when a channel is

deleted.

Repeat Steps 3 and 4 for each channel to be added or deleted.

Press ACTION three times.

SETTING TIMER

You can set the TV to turn off after a preset amount time.

Press ACTION and press

select the TIMER mode, then press

ACTION.

to select desired time, then press

Press

and then press

ACTION.

After the timer is programmed, the display will disappear then reappear momentarily every

ten minutes to remind you the timer function is operating.

To confirm the timer setting, repeat step 1. The remaining time will be displayed.

To cancel the timer setting, select the OFF.

ADJUSTING PICTURE

You can adjust the settings for color, sharpness, contrast, brightness and tint.

Press ACTION twice to select the PICTURE mode.

Press

to select desired picture, then press

Press

to adjust the setting.

more vibrant color

COLOR

greenish hue

TINT

increase brightness

BRIGHTNESS

increase contrast

PICTURE

makes picture

SHARPNESS

clearer

TO RETURN TO INITIAL SETTING

Select the NORMAL then select SET as in step2.

PICTURE

LOCK

. Then press

SET UP

LANGUAGE/IDIOMA/LANGUE

MODE

AUTO PROGRAM

MANUAL PROGRAM

/ /

ADD

if you wish to ADD the

reduces color

reddish hue

decrease brightness

decrease contrast

makes picture softer

CONNECTION TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the TV is

dependent on the model and features of each component. Check the Owner's Manual provided with

each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to

accommodate your particular assortment of components. The diagrams are intended to show

component video and audio interconnections only.

Press the TV/VIDEO to select the AV mode to use the TV as a monitor.

Operate your VCR as usual.

TIMER

NOTE:

EXIT

TV/VIDEO only exists in the remote control.

SET UP

TV/AV SELECTION

If you connect the TV to a VCR, camcorder or TV

game, through the audio/video in jacks, use the

: TV CABLE

TV/VIDEO to make your selection.

: OFF

Press the TV/VIDEO repeatedly to select the

/ACTION

desired mode.

"AUX" will display on the screen for 4 seconds.

1. To connect the TV to a VCR

VCR

To Audio/

Video OUT

(not supplied)

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS

CH 012

TV does not operate

Poor sound or No sound

Poor picture or No picture

Poor reception on some

channels

Poor color or no color

Picture wobbles or drifts

No CATV reception

Horizontal or diagonal bars

on screen

No reception above

channel 13

No Remote operation

TV shuts off

Cannot see closed

caption

Display is not shown in

your language

SPECIFICATIONS

AC Power Input:

AC Power Consumption:

Chassis Construction:

Picture Tube:

Horizontal resolution:

Audio Power Output Rating:

Speaker:

Tuner Type:

Remote Control:

Receiving Channels:

Antenna Input Impedance:

Input:

Dimensions:

Weight:

2. To connect the TV to a TV Game

The TV can also be used as a display device for

many video games. However, due to the wide

variety of different types of signal generated by

these devices and subsequent hook-up variations

required, they have not all been included in the

suggested connection diagrams. You'll need to

consult each component's Owner's Manual for

additional information.

To Audio/Video OUT

AUX

3. To connect the TV to a camcorder

To playback from the camcorder, connect the

camcorder to the TV as shown.

Front of TV

CHANNEL

VIDEO IN AUDIO IN

VIDEO

AUDIO

POSSIBLE SOLUTIONS

• Make sure the power cord is plugged in.

• Try another AC outlet.

• Power is off, check fuse or circuit breaker.

• Unplug unit for an hour, then plug it back in.