Panasonic CT-13R52D Operating 사용 설명서 - 페이지 2
{카테고리_이름} Panasonic CT-13R52D Operating에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CT-13R52D Operating 13 페이지. Panasonic ct-13r32: user guide
Panasonic CT-13R52D Operating에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
C
ONGRATULATIONS
Your new TV Monitor/Receiver features a solid
state chassis that is designed to give you many
years of enjoyment. It was thoroughly tested and
tuned at the factory for best performance.
Customer Record
The model and serial number of this product may
be found on the back of the unit. You should note
the model and serial number in the space provided
and retain as a permanent record of your
purchase. This will aid in identification in the event
of theft or loss.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
•
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
•
Avoid excessive moisture and wipe dry.
Note:
Do not spray any type of cleaning fluid
directly on the screen.
Cabinet and Remote Control
•
Use a soft cloth dampened with water or
a mild detergent solution. Do not use
benzene, thinner, or other petroleum
based cleaners.
•
Wipe dry with a soft, clean cloth. Avoid
excessive moisture.
Specifications
Power Source
CT-13R32C
(0.9A)
CT-13R42C
(0.9A)
CT-13R52D
(0.9A)
CT-20D11D
(1.4A)
CT-20G6D
(1.4A)
CT-20R6C
(1.3A)
CT-25G6C
(1.8A)
Channel Capability - 181
Video Input Jacks
(some models)
Audio Input Jacks
(some models)
To Audio AMP Jack
(some models)
Specifications are subject to change without notice
or obligation.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
:
WARNING
To reduce the risk of electric shock do not
remove cover or back. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with
arrow head within a
triangle is intended to
tell the user that parts
inside the product are a
risk of electric shock to
persons.
WARNING
To prevent fire or shock hazard, do
:
not expose this appliance to rain or moisture.
120V AC, 60Hz
VHF-12;
UHF-56;
Cable-113
1V
, 75 Ohm,
p-p
Phono Jack Type
500mV RMS
47K Ohm
0-2.0V RMS
4.7K Ohm
The
exclamation
point
within a triangle is intended
to
tell
the
user
that
important operating and
servicing instructions are in
the
papers
with
the
appliance.
- 2 -
I
NSTALLATION
Television Location
Follow these recommendations before deciding the
location of your television.
r
Avoid excessive sunlight or bright lights,
including reflections.
r
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
r
Fluorescent lighting may reduce Remote
Control transmitting range.
r
Avoid magnetic equipment, including motors,
fans, or external speakers.
CAUTION:
Use this television
receiver only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used, use
caution
when
moving
combination to avoid injury from tip-over. In order
to avoid injury to children, never place your
television receiver on a piece of furniture that is
capable of being tilted by a child leaning on it,
pulling on it, standing on it, or climbing on it.
AC Power Supply Cord
CAUTION:
TO
ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT
POWER
WALKED ON, ROLLED OVER, CRIMPED, BENT
OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE
RECEPTACLES,
POINT
WHERE
THEY
APPARATUS.
Optional Cable Connections
Shielded audio and video cables should be used
between components. For best results:
•
Use 75-ohm coaxial shielded cables.
•
Use appropriate input and output
connectors that match your component
connectors.
•
Avoid long cables to minimize interfer-
ence.
Batteries
•
Replace batteries in pairs.
•
Do not mix battery types (zinc carbon
with alkaline).
•
Do
not
disassemble,
batteries.
Read these instructions completely before
operating TV.
Contents are subject to change without notice
or obligation.
the
cart/apparatus
PREVENT
Polarized plug
CORDS
FROM
BEING
AND
THE
EXIT
FROM
THE
recharge,
short-circuit,
heat,
or
burn
used