Panasonic CT-20G31 사용 설명서 - 페이지 19
{카테고리_이름} Panasonic CT-20G31에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CT-20G31 24 페이지. Panasonic ct-20g21: user guide
Panasonic CT-20G31에 대해서도 마찬가지입니다: 사용 설명서 (25 페이지)
페이지 인쇄Set-up Features
(cont.)
Located On Remote Control
Manual Prog (Program) - Thisfeature
allows you to select which channels are placed into
Channel Scan Memory.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3.
Press the ACTION button to display the Set-Up
Menu.
Selects or Adjusts
FeaturesWhen
Menu is Displayed
Highlight Desired
Feature When
Menu is Displayed
Displays and Exits Menus
Auto Prog (Program)
- Thisfeatureallows
you to place all channels with a video signal into Channel
Scan Memory.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3.
Press the ACTION button to display the Set-Up
Menu.
4.
Press the CH DOWN button to highlight "AUTO
PROG".
5.
Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
6.
Press the ACTION button twice after completion of
Auto Programming to exit the Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
-19-
4.
Press the CH DOWN button to highlight "MANUAL
PROG".
5.
Press the VOL LEFT or RIGHT button to display the
Manual Programming Menu.
6.
Use the CH UP or DOWN button or the Remote
Keyboard "0 through 9" buttons to select channels.
7.
Press the VOL RIGHT button to add channel(s) to
memory
(Blue). Press the VOL LEFT button to
delete channels from memory (Yellow).
8.
Repeat steps 6 and 7 to continue adding or deleting
channels.
9.
Press the ACTION button twice to exit the Manual
Programming Menu.