AquaSource 0016531 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} AquaSource 0016531에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaSource 0016531 8 페이지. Pull-down kitchen faucet

ASSEMBLY INSTRUCTIONS

Remove quick connector (J) from the hose (B)

by unscrewing it counter clockwise.

hose (B) up through faucet (A), until the hose (B)

fitting is flush with the bottom of shank (C). Do

not pull fitting past the shank (C). Insert faucet (A)

through holes in top of sink. From underneath sink,

install rubber washer (F), metal washer (G) and

nut (H) onto the mounting shank (C).

Note: Do not feed the hose (B) back down through

the spout until step 4.

4. To install the hose (B), screw quick connector (J)

to the free end of hose (B). Align block (K) and

tab (L) on quick connector (J). Push quick

connector (J) housing firmly upward and snap onto

block (K). Pull down moderately to ensure connection

has been made.

If it is necessary to remove the hose,

press on the tabs (L) and pull quick connects (J) down.

After connecting the hose (B), attach weights (M) to

hose (B) at bottom of loop to prevent hose (B) from

twisting and return hose (B) to proper position.

5. Connect 1/2 in. IPS faucet

nuts (not included) with 3/8 in. O.D.ball-nose

risers (not included) to water supplies using

wrenches (not included).

Note: Refer to local plumbing codes for

permissible types of water supply connectors.

Retract

connector

or coupling