Panasonic CT-27G30CT 사용 설명서 - 페이지 12
{카테고리_이름} Panasonic CT-27G30CT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CT-27G30CT 36 페이지.
Panasonic CT-27G30CT에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)
페이지 인쇄Cable
Power
Button
-
The CABLE Power
button on the Remote Control has been designed to
operate selected brands of Cable Converter Boxes. The
proper Cable Converter
Box infra-red code must be
obtained prior to use. (Please refer to Programming the
Universal Remote for programming instructions.) The
TV/AUX/CABLE switch should be in the cable position.
NOTE: Use the Channel UP and DOWN buttons on the
Remote
for
selecting Cable
Converter
Box
Channels.
Located
On Remote
Control
CABLE
POWER
Use to select Cable
Box
Channels after programming
Infra-red Code.
PIP (Picture in Picture) Button -This
feature allows the viewer to monitor one channel
program while watching another. The monitored source
(PIP) can be a different channel or a different video
source (such as a VCR) when connected to the input
jacks.
• The TV/AUX/CABLE
Switch should be in the TV
position (LEFT) before operating PIP buttons.
• S-Video connection will also operate the PIP feature
(refer to OPTIONAL S-VIDEO VHS CONNECTION
section).
• When the Main Picture is in Video mode with no
signal, the PIP will not operate properly.
PIP Operation
1.
Press the PIP button. The PIP frame will appear at
the position it was last displayed. The Main Picture
channel and PIP channel will display momentarily.
Audio will be that of Main Picture.
2.
To select CHs for the Main Picture, use the Remote
Control Keyboard or Channel UP/DOWN buttons.
To select CHs for the PIP frame use the Remote
Control PIP Channel UP/DOWN buttons.
3.
Press the PIP button again to cancel PICTURE IN
PICTURE feature.
NOTE: For PIP Video source connection, refer to PIP
Antenna and External Video connection section.
PIP Channel Buttons - Press the(PIP)
CH
(CHANNEL) UP or DOWN button while the PIP frame is
displayed to sequentially scan through Channels.
Scan Channel DOWN
Scan Channel Up
(next lower)
(next higher)
PIP Swap Button
- Press the SWAP button
(when the PIP frame is displayed) to interchange what is
being viewed on the Main Picture with that of the PIP
frame.
CH O2
PIP VIDEO 1
Audio will be that of the Main Picture.
Main
Picture
with
Sound
CH 2
PIP CH 5
r-1
Main Picture
Channel
11----
Picture in
Picture
Channel
Picture in
Picture
Frame
-12-