Diamond Audio MOTORSPORT MP654 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Diamond Audio MOTORSPORT MP654에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Audio MOTORSPORT MP654 12 페이지. Pro audio horn coax drivers
페이지 인쇄
TWEETER DIAPHRAGM REPLACEMENT - REASSEMBLY
Phase Plug
Gently take the "NEW" Tweeter Diaphragm Assembly
and put the Phase plug you just removed onto it.
BE CAREFUL not to damage the NEW Titanium
Diaphragm assembly.
Soldering
Iron
Using a DVM (or AA battery) make sure that
the tweeter is actualy connected. "Pop" it a
couple times or read the impedance (8 W)
Once tested then finish putting the back cover
on with the stainless 4mm hex head hardware
you removed in the beginning.
Gently take the "NEW" Tweeter Diaphragm Assembly
and put the Phase plug you just removed onto it.
BE CAREFUL not to damage the NEW Titanium
Diaphragm assembly.
Tweeter Diaphragm
Assembly
Get the Back cover and Re-Solder the tweeter wires.
Make sure to connect the wire correctly both the
positive (+) and negative wire from the back cover (-)
Tweeter Diaphragm
Assembly
60/40 Solder
Allen Wrench
9