AquaStar 2400 ES 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} AquaStar 2400 ES에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaStar 2400 ES 12 페이지. Tankless water heater
AquaStar 2400 ES에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)
페이지 인쇄Installing outdoor kit
3
Installing outdoor kit
Replace the control panel shield
B Loosen the two Philips head screws located on
bottom rear of cover (see Fig. 2).
Fig. 2
Loosen the two screws
B Remove the front cover panel and replace the
original control panel shield with shield provided in
the kit, see Fig. 3.
1.
2.
3.
Fig. 3
Replace the control panel shield
Warning: The control panel shield
must always remain closed, except
when making adjustments, to prevent
damage to heater from weather.
B After replacing the control panel re-position the front
cover.
4
6720608547-14.1AL
1.
B 1. Remove the cover plate (A) installed on the top of
the appliance, as shown in Fig. 4.
B 2. Attach the supports (B) to the appliance by
fastening with the four provided screws, as shown in
Fig. 4.
Fig. 4
Before mounting the outdoor kit in the appliance:
B 3. Attach the gasket provided with the kit as shown
in Fig. 5.
Fig. 5
B Position the outdoor vent cap on the top of the
appliance, as shown in Fig. 6.
6 720 608 835