Aquasub engineering AQUA GROUP AQUATEX AV-5 운영 매뉴얼 - 페이지 6

{카테고리_이름} Aquasub engineering AQUA GROUP AQUATEX AV-5에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasub engineering AQUA GROUP AQUATEX AV-5 15 페이지.

GENERAL INSTALLATION PRECAUTIONS

No.

If it is necessary to increase the diameter of the suction pipe, place an eccentric reducer

between the isolating valve and the flexible pipe section.

Using elbows will increase the flow resistance. Wide bends will result in lesser flow

resistance.

The piping must have a level or positive gradient to prevent the formation of air pockets.

The diameter of the drop pipe must be bigger than the diameter of the pump's suction

port.

Use a foot valve in case of negative suction head.

Size pump for correct head.

Place the intake of the suction pipe so that the intake is always submerged to prevent

entry of air.

Install a compound gauge at the pump suction and a pressure gauge at the pump

discharge.

Do not use this pump for sandy water, oil, toxic, acetic, corrosive and

inflammable liquids. Pumping inflammable liquids could cause

explosion. Warranty is void, if pump is used for other than clear cold

water.

The pump must be fixed firmly by bolts through the holes in the flange

or base plate.

Use good quality pump accessories (Non Return Valve, nipple, pipe,

ball valve, etc..) for better performance and trouble free operation.

If you find damage or discrepancy in the product, contact the dealer

where the pump was purchased or the "AQUASUB ENGINEERING's"

sales office in your area.

Description