AquaSure FORTITUDE PRO Series 매뉴얼 - 페이지 12

{카테고리_이름} AquaSure FORTITUDE PRO Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaSure FORTITUDE PRO Series 20 페이지. Whole house water treatment system
AquaSure FORTITUDE PRO Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

페이지 인쇄

STEP 6.

Attaching the Water Supply Pipe to the Treatment System

1. Place the blue gasket in between the valve body

and the adapter. Screw the adapter into the

valve body.

2. Apply the same procedure to all three openings.

Note: Make sure the o-ring is inside the housing and do not over tightening the housing.

STEP 7.

Mounting the Valve Body onto the Media Tank

1. Apply a small amount of lubricant onto the

o-ring of the valve body. (Do not apply lubricant

on the thread.)

2. Lubricate the riser tube located on the opening

of the media tank. Make sure the riser tube is

flush with the top of the tank.

3. Install the upper basket on the bottom of the

valve by lining up the tabs, pressing in, then

turning the basket counterclockwise to lock it in

place.

AQUASUREUSA.com

Tel: 1-800-661-0680