AquaSure FORTITUDE PRO Series 매뉴얼 - 페이지 15
{카테고리_이름} AquaSure FORTITUDE PRO Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaSure FORTITUDE PRO Series 20 페이지. Whole house water treatment system
AquaSure FORTITUDE PRO Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)
페이지 인쇄
GETTING TO KNOW THE VALVE HEAD
IMPORTANT! The valve head has three settings. By reviewing the information below you can
ensure the system is working properly and providing you with improved water quality.
Process
FILTER
This is the standard setting when your water
treatment system is in use.
Water will flow in from the source and out to
your home plumbing.
BACKWASH
The Backwash setting is used to remove
impurities from the system and expands the
media.
Water will flow out of the valve port that
should be sent to the drain.
FAST RINSE
Fast Rinse setting is used immediately after
the Backwash cycle. The Fast Rinse process
forces the media to settle back down into the
tank.
Water will flow out of the valve port that
should be sent to the drain.
In from the main
water line
Description
OUT TO DRAIN
Recommended Time
Ongoing
Recommend every 7-10
days or as needed.
Run water for 15 minutes.
Then perform a Fast Rinse
cycle.
More time may be needed
if desired result is not
achieved.
Perform immediately after
the Backwash cycle.
Run water for 5 minutes.
Out to the
house
AQUASURE
FORTITUDE PRO SERIES
12