3branch KURVE COLLECTION 조립 지침 - 페이지 4
{카테고리_이름} 3branch KURVE COLLECTION에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3branch KURVE COLLECTION 5 페이지. Round computer table w/cylinder base & top dividers
페이지 인쇄
STEP 6
LAY SUB-TOP ON FLOOR COVER.
NOTE: COUNTERSUNK TOP MOUNTING HOLES ARE FACING UP.
FLIP BASE CYLINDER OVER WITH LEVELERS TURNED UP.
CENTER BASE CYLINDER ON SUB-TOP.
MARK & DRILL 1/8"DIA PILOT HOLES IN SUB-TOP FOR MOUNTING
SCREWS.
STEP 8
FLIP BASE CYLINDER/SUB-TOP ASSEMBLY UPRIGHT.
KURVE COLLECTION
3branch
product design solutions
COUNTERSINK
FACING UP
SUB-TOP
STEP 7
MOUNT BASE CYLINDER TO SUB-TOP WITH #12 X 3/4" FLAT HEAD PHILLIPS
SCREWS INSERTED THRU MOUNTING PLATES & THREADING INTO PILOT
HOLES PREVIOUSLY DRILLED IN BOTTOM FACE OF SUB-TOP.
STEP 9
LAY TOP OVER SUB-TOP
*NOTE: RECESSED COUNTERSUNK MOUNTING HOLES FOR TOP
*DO NOT ATTACH TOP DURING THIS STEP!!!
DESCRIPTION:
P 847.291.3900
F 847.291.3901
www.3branch.com
DATE:
07.08.21
DIVIDER BRACKETS NEED TO BE FACING DOWN.
ROUND COMPUTER TABLE
W/CYLINDER BASE & TOP DIVIDERS
ASSEMBLY INSTRUCTIONS
DRAWING #
KU-CT-60-26-CYB-ATD-ASSEMBLY-01
#10 X 3/4" FHP
SCREWS
TOP PANEL
REV #
0
SHEET
4 OF 5