Aquatec HydroPro HZ2010 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Aquatec HydroPro HZ2010에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquatec HydroPro HZ2010 13 페이지. Air pumps

페이지 인쇄

BENEFITS INCLUDE

The Hydropro Aeration Kits have been manufactured with advanced technology to provide you with the

best quality aeration for smaller scale ponds or water features.

Visit our website to view our range of pond filtration, outdoor/underwater lighting, water treatments

and general accessories. Hydropro Aeration Kits are suitable for many different applications including

aquariums and small scale fish pond/water garden applications.

Aeration is a very effective method of enhancing pond fish habitats, improving water quality, reducing

algae, and removing phosphorus. Aeration can also break down unwanted bacteria, help with mosquito

problems, and remove foul odours from an aquarium or pond -- all by circulating the water and adding

dissolved oxygen.

IMPORTANT SAFEGUARDS

Please read the operating instructions and familiarize yourself with the equipment before placing it in service. Correct

and safe use of the system requires strict compliance with these safety instructions. For safety reasons persons less

than 16 years of age or persons that are not familiar with these instructions, should not use this equipment.

• Any damage to the equipment or unmerited

operation can potentially bring dangers to the

surrounding precincts. If there is any damage

of the equipment, it must not to be used. The

equipment should be placed out of reach of

children.

• For your own safety, completely disconnect all

electrical appliances before any maintenance of

equipment is attempted on/in the tank or body

of water. Always unplug the air pump from the

power supply when not in use. Never pull the

cable to disconnect the plug from the power

supply - Grasp the plug and pull to disconnect.

Care should be taken to ensure the power cable

is situated to avoid a tripping hazard.

• Cutting the cable may void your warranty.

• If required, have a qualified electrician install a

weatherproof power supply point in reach of

the water-feature (within the cable length of

the appliance). For applications within the US

or Canada- make sure to plug the pump into

an electrical outlet with a (GCFI) Ground Fault

Circuit Interrupter.

• To prevent electric shocks, do not attach the

plug to the power supply socket with wet hands.

On installation, the drip loop method should be

HPRO Air Pump Z2010_Z4010 Instructions.indd 3

INSTRUCTION MANUAL

used to prevent water from traveling down the

cable and onto the plug or into power supply. If

the plug does get wet, do not unplug the cable.

Immediately disconnect the circuit breaker

that supplies power to the power supply point.

Unplug and examine the plug and power supply

point for the presence of water. If the power

point has become wet, you should consult an

electrician before using the power point again.

• Do not submerse air pump directly in water.

The distance from air pump to the water's edge,

should not be less than 6ft/1.8 m.

• Do not operate the appliance if any components

of the system, such as the power cable,

have been damaged. Check appliance and

components of the kit for defects regularly.

• Do not install or store the appliance where

it will be exposed to extreme hot or cold

temperatures. Do not use in ambient

temperatures above 95°F/35°C

• Do not attempt to repair the electrical appliance

yourself. Return to an authorized dealer or

place of purchase if a fault occurs. Regular

maintenance is not considered a repair (e.g.

replacing the diaphragms and air filter is

required by user).

V I S I T A Q U A T E C E Q U I P M E N T . C O M

AIR PUMP

22/2/19 11:07 am