Diamond Guitar Pedals MEMORY LANE 사용자 설명서 - 페이지 10

{카테고리_이름} Diamond Guitar Pedals MEMORY LANE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Guitar Pedals MEMORY LANE 16 페이지.

External Feedback Loop

The external feedback loop is a versatile path both to externally control delay

feedback levels, and as a means to further tailor the delay sound by process-

ing feedback echoes through an external chain of effects.

Expression Pedal

The Memory Lane accepts expression pedals with TRS (Tip-Ring-Sleeve or

sometimes known as stereo) plugs. With the expression pedal backed off

completely, only a single echo will be heard, while moving the expression

pedal up will increase the number of repeats, and at maximum can bring the

Memory Lane into oscillation. With practice, the amount of oscillation can be

expressively controlled by carefully moving the expression pedal in and back

from its ﬁrst point of oscillation.

Inserting an expression pedal into the jack removes the feedback level control

from operation.

��

Effect Insert

By using a standard 1/4" TRS to two mono 1/4" plug cable, any chain of ef-

fects can be inserted into the feedback path of the Memory Lane. The TRS

plug should be plugged into the Memory Lane, the 'Send' or 'Tip' signal mono

1/4" plug should be plugged into the input of the ﬁrst pedal of the chain, and

the 'Receive' or 'Ring' signal mono 1/4" plug should be plugged into the output

of the last pedal of the chain. As with the expression pedal, inserting the cable

into the EXP jack will remove the feedback level control from operation, and in

doing so, at least one device in the external pedal chain must have a volume

control so that the system doesn't continuously oscillate. By using a standard

volume pedal as the last device in the feedback effect chain, it can do double

duty as a feedback expression pedal and as the volume control necessary to

limit oscillations.

- 10 -