Panasonic AG-CX350 매뉴얼

{카테고리_이름} Panasonic AG-CX350에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-CX350 21 페이지. How to connect with youtube live
Panasonic AG-CX350에 대해서도 마찬가지입니다: 매뉴얼 (24 페이지), 연결 방법 (8 페이지)

페이지 인쇄

SKAARHOJ DEVICE CORES

Device: Panasonic AG-CX350

Introduction

The Device Core "Panasonic CX350" is used for controlling the AG-CX350 and AG-CX10 cameras. The

goal of this manual is to help conﬁguring a SKAARHOJ interface to control features available in the Device

Core at this present time.

Multicam Control

Please notice with the release of UniSketch v2.4.16 Multicam Control have been enabled. Prior to v2.4.16

only a single camera could be controlled from the Device Core. With the update up to 4 cameras can be

controlled from a single Device Core. Please see information in the section "Multicam Control"

Setting up Camera

In order to control the camera it must be connected to the same network as your SKAARHOJ Controller..

All communication between a SKAARHOJ interface and the camera is done via IP. The implementation

have been done on version 1.01-00.0.00