Panasonic AG-GH4 series 펌웨어 업데이트

{카테고리_이름} Panasonic AG-GH4 series에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-GH4 series 1 페이지. Pocket cinema camera body

Firmware update procedure

Model: AG-GH4 series (Camera body)

1. How to check firmware version

1. Switch ON the power of the camera.

2. MENU > " SETUP" > "VERSION DISP" > "Body Firmware" to display the version information.

2. Updating firmware

[Preparation]

1. Format an SD card (from 8MB to 64GB) with the camera.

2. Download a firmware ZIP package from the Panasonic professional video support site at

http://panasonic.biz/sav/pass_e

3. Extract the ZIP package, and then copy the extracted firmware (".bin" file) to the SDcard's root (upper directory).

[Performing update]

4. Insert the SD card into the SD card slot on the camera. And DISCONNECT HDMI cable if connected

between AG-YAGH interface unit and AG-GH4 camera body.

5. Turn ON the power of the camera, and press the "PLAY"

6. At the "Version up" screen, choose Yes to execute. (Version display example)

Body

7. When the progress bar reaches at the end, camera automatically turn OFF > ON the power. Update work may

take approximately 5 minutes. Check the firmware version.

CAUTION:

Do NOT turn OFF the power or eject the SD card while update is in progress, interrupting communication between

SD card and equipment may cause unrecoverable failure.

Version display example

1.1

Ver.1.0

-.-

Ver.1.0

button to go to update mode.