Panasonic AK-HC931B 사용자 설명서 - 페이지 31

{카테고리_이름} Panasonic AK-HC931B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AK-HC931B 32 페이지. Multi-format digital camera
Panasonic AK-HC931B에 대해서도 마찬가지입니다: 브로셔 (8 페이지)

페이지 인쇄
Panasonic AK-HC931B 사용자 설명서

Specifications

Power supply:
DC 12 V (when external power is supplied)
AC 150 V–240 V (when CCU is connected)
Power consumption:
33 W (during external power supply operation)
43 W (when CCU is connected)
indicates safety information.
Operating temperature
range:
32F to 104F (0C to +40C)
Storage temperature
range:
–4F to 140F (–20C to +60C)
Operating ambient
humidity:
Less than 85%
Weight:
Approx. 10.7 lbs (4.85 kg)
Dimensions:
5 (W)11-1/16 (H)14-3/8 (D) inch
(excluding protrusions)
126  280  365 mm
Basic items
1) Pickup device:
2/3 million pixel ITCCD  3
2) System:
GBR pickup system
3) Color separation
optical system:
f/1.4 prism
4) Optical filters:
CC: 3200K, 4300K, 6300K, Cross
ND: CAP, Through, 1/4, 1/16, 1/64
5) Lens mount:
Bayonet type
6) Output standard:
SMPTE 296M/274M
7) Sensitivity:
f/10.0, 2000 lux, 3200 K, white
reflectance 89.9%
8) Horizontal modulation: More than 45% (27.5 MHz)
9) S/N ratio:
54 dB (Y: 30 MHz)
10) Horizontal frequency: 44.955 kHz, 750-line frame
/33.716 kHz, 1125 line frame
11) Vertical frequency: 59.94 Hz, progressive
/59.94 Hz, interlace
Input/output signals
1) Mic input:
–20, –30, –40, –50, –60 dBm
(XLR 3-pin female2)
Gain selected by switch
2) INCOM:
0 dBm/600 ohms
(XLR 5-pin, female2)
(Mixing is controlled separately for
PGM1 and PGM2.)
3) Monitor output:
HD signals = 1Vp-p, 75 ohms (BNC)
Output signals can be selected using
the monitor output selector switch.
4) QTV output:
VBS signal = 1 Vp-p, 75 ohms (BNC)
5) G/L input:
1 BNC connector (tri-level SYNC)
6) AUX output:
VBS signal = 1 Vp-p, 75 ohms (BNC)
(when optional unit has been installed)
Diffusion
Control
1) Power selection:
2) USER SEL:
3) RET A/B selection: For selecting the return signal
4) Front tally selection: Front tally HIGH, LOW, OFF (VF unit)
5) Viewfinder marker
selection:
6) Gain selection:
7) Output selection:
8) White balance mode: A, B, preset
9) Shutter speed
selection:
10) AWB, ABB settings
11) Menu selection
12) CALL SW
13) INCOM:
14) MIC setting:
15) Optical filter setting: REM, LOCAL selection and LOCAL
*When the CCU is connected, the selection functions for 6) to 10)
are not effective.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
31
EXT, OFF, CCU
Functions specified by menu items
can be allocated to the switch.
Center marker, safety zone, 4:3 marker
LOW, MID, HIGH
CAM, BAR, TEST
1/100, 1/125 1/250, 1/500, 1/1000,
1/2000
MIC ON/OFF, receive or PGM level
MIC power, MIC gain, MIC1 selection
setting