Panasonic AW-HE130KE 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Panasonic AW-HE130KE에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AW-HE130KE 24 페이지. Hd integrated camera

How to install and connect the unit (continued)

Mount the mount bracket onto the installation surface.

• Use the bracket mounting screws (M4, bind-head: 10 mm long) supplied with the unit.

• For proper clamping torque, securely attach the screws using the specified tools.

Screw

Clamping torque

diameter

1.47 N · m (15 kgf · cm)

<NOTE>

• Use only the screws supplied with the unit. Do not use any other screws such as wood screws, nails, etc.

Attach the drop‑prevention wire.

• Loop the circle part of the drop-prevention wire, which has been attached to the bottom panel of the unit, around the end of the hook part of the

mount bracket.

• Pull the drop-prevention wire, and check that it has been attached securely to the hook.

<NOTE>

• Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.

• The drop-prevention wire is designed to be used for installation where the unit is suspended from an overhead surface so do not subject it to the

weight of units other than the unit.

End of hook

Drop‑prevention

wire

Loop the circle part of the drop‑

prevention wire around the end

of the hook part of the mount

bracket.

Bracket mounting screws x 4 (supplied)

(M4, bind‑head)

Pull the wire, and check that

it is securely attached to the

hook.