Panasonic AW-HEA10KEJ 설치 및 운영 지침 매뉴얼 - 페이지 34

{카테고리_이름} Panasonic AW-HEA10KEJ에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AW-HEA10KEJ 40 페이지. Control assist cameras
Panasonic AW-HEA10KEJ에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지)

페이지 인쇄

1. Installation Instructions

Troubleshooting (continued)

Symptom

Web screen cannot be accessed

Settings on the Web setup screen or

the camera images are not updated

or displayed properly

No pictures are displayed or the

pictures are disturbed

Multiple color bands (color bars) are

displayed

Something is wrong with the

coloring of the pictures

When fine lines or cyclical patterns

are shot, flickering is seen or

coloring is added to them

• Has 554 been set as the HTTP port number?

→ F or the HTTP port numbers that can be used by the unit, refer to "HTTP port" (→

PDF page 24).

• Has the same IP address setting been used for another device?

[When the unit and personal computer are connected in the same subnet]

Set IP addresses for the unit and personal computer that are in the same subnet.

Also, disable the "Use proxy server" setting in the Web browser. When accessing the

unit within the same subnet, it is recommended that the unit's address be set to the

[Remove from proxy] address.

[When the unit and personal computer are connected to different subnets]

Check whether the default gateway value set for the unit is correct.

• Enable the HTTP referer send function of the firewall function, etc. of the

antivirus software.

For details, refer to the instructions for the antivirus software.

For Windows:

• Press the [F5] key on the computer's keyboard to request that the settings be

acquired.

For Mac:

• Press the [Command] + [R] key on the computer's keyboard to request that the

settings be acquired.

• Perform the following to delete the temporary Internet files.

For Windows:

1 Select [Tools] - [Internet Options] in Internet Explorer.

2 Click the [General] tab, and click the [Delete] button under [Browsing history].

3 I n the [Delete Browsing History] dialog box, select the [Temporary Internet Files]

check box, and then click [Delete].

4 Click the [OK] button.

For Mac:

1 Select [Safari] - [Empty Cache] in Safari.

2 C lick [Empty] in the [Are you sure you want to empty the cache?] pop-up screen.

• If [Check for newer versions of stored pages] is not set to [Every time I visit the

webpage] in the temporary Internet file settings, IP images may not appear in the

Web setup screen.

For Windows:

→ Perform the following.

1 Select [Tools] - [Internet Options] in Internet Explorer.

2 Click the [General] tab, and click the [Settings] button under [Browsing history].

3 I n the [Temporary Internet Files and History Settings] dialog box, select the [Every

time I visit the webpage] option under [Check for newer versions of stored pages].

4 Click the [OK] button.

• Is the unit connected to the other devices correctly?

• If the system is configured in such a way that the picture is also switched when the

unit to be operated is selected, has the correct unit been selected?

• Are [Format], [Down CONV. Mode], and [System Frequency] set correctly?

• Switch to the camera picture.

• Set the white balance to ATW (auto). If the color is not correct even with ATW, set

a white balance set.

• This phenomenon occurs because the pixels are arranged systematically on

each image sensor. It is noticeable when the spatial frequency of a subject and

the pixel pitch are brought into proximity, so change the camera angle or take

other such action.

Cause and solution

Reference pages

PDF page 24

– – –

page 19

– – –

PDF page 22

PDF page 25

PDF page 21

– – –