Panasonic AW-HEA10KPJ 설치 및 운영 지침 매뉴얼 - 페이지 13
{카테고리_이름} Panasonic AW-HEA10KPJ에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AW-HEA10KPJ 40 페이지. Control assist cameras
Panasonic AW-HEA10KPJ에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지)
페이지 인쇄
How to install and connect the unit (continued)
Standing installation
The procedure is the same as for suspended installation. For further details on installation and connection, refer to (→ pages 9 to 11).
<NOTE>
• For the standing installation, the bracket attachment procedure differs from that for the suspended installation. Attach the mount bracket in reference
to page 8 before performing this work.
1.
Check the mounting space. (→ page 9)
<NOTE>
• As with installing the unit suspended from an overhead surface, carefully check the space where the unit will be mounted, and then decide if it is
appropriate to install the unit in that space.
2.
Attach mount bracket B onto the installation surface. (→ page 10)
3.
Attach the drop‑prevention wire. (→ page 10)
4.
Mount the unit. (→ page 11)
• Align the hole for checking the positioning of mount bracket B with the positioning mark of the unit.
• Align the bottom insertion holes of the unit with the camera insertion protrusions of the bracket and then push the unit and bracket together firmly
and rotate the unit by approx. 20° in the direction of the arrow.
• Secure the unit and mount bracket B with the supplied bracket mounting screw B (M3 x 6 mm).
5.
Check the mounting. (→ page 11)
6.
Connect the rear panel connectors. (→ page 11)
Bracket mounting screws A
(M4 x 10 mm, binder‑head)
Positioning mark
On the unit:
Bottom insertion
holes
(3 places)
On the mount
bracket:
Camera insertion
protrusions (3 places)
Hole for checking
the positioning
Approx.
20°
Bracket mounting
screw B (M3 × 6 mm)
13