Panasonic AW-HEA10WEJ 사용 설명서 - 페이지 25
{카테고리_이름} Panasonic AW-HEA10WEJ에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AW-HEA10WEJ 34 페이지. Control assist cameras
Panasonic AW-HEA10WEJ에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (40 페이지)
페이지 인쇄
Web screen configurations (continued)
Maintenance screen
This screen allows you to perform maintenance related operations such
as viewing the unit information or initializing the settings.
The screen consists of two tabs: [Information] and [Other].
Information screen
Displays the model number ([Model no.]), MAC address ([Mac address]),
and software version ([Firmware version]) of the unit, and the user last
logged in to the Setup screen ([Access log]).
To display the [Information] screen, click the [Information] tab in the
[Maintenance] screen.
Model no.
Displays the unit's model number.
MAC address
Displays the unit's MAC address.
Firmware version
Displays the unit's software version.
Access log
Displays the user last logged in to the Setup screen.
Other screen
Initialize the unit's setting data or configure the display settings.
To display the [Other] screen, click the [Other] tab in the [Maintenance]
screen.
Reset to the default (Except the network settings)
Restore the unit's settings to the initial settings.
A confirmation message appears when the [Execute] button is
clicked. Click [OK].
CAM/BAR
Change the image displayed on the monitor of the HDMI output
destination or the Web setup screen.
After changing this setting, click [Execute].
Setting values:
Camera
Displays the camera image.
Colorbar
Displays the color bars.
Factory setting: Camera
<NOTE>
• You can also switch between the camera image display and the
color bar display with the controller.
• The color bars displayed differ depending on the system frequency
setting.
Guideline
Select whether to show or hide the guideline display.
After changing this setting, click [Execute].
Setting values: Off / On
Factory setting: Off
Operation time
Check the unit's operation time.
25