Panasonic BM-ET300AE 사용 설명서 - 페이지 11

{카테고리_이름} Panasonic BM-ET300AE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic BM-ET300AE 35 페이지. Iris camera

페이지 인쇄

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

■ External View

● Front View

q Mirror

This mirror is used for eye positioning at the time of iris

data enrollment/recognition. View the mirror from the

front side where you can position both eyes in the mir-

ror.

w Guide indicator

When a user comes within 50 cm {1.64 ft.} of the front of

an iris camera, this indicator will appear in the mirror for

guidance. Adjust your eye position by following the

guide indicator or voice guidance from the speaker.

e Front panel

Eye image capturing cameras and a near-infrared light

are located behind this panel. Depending on the user,

the near-infrared light (blinking red light) can be seen.

Notes:

• Avoid covering the front panel with a hand or cloth,

etc. That may cause invalid recognition.

• Avoid pinching objects between the front panel and

the main unit. That may cause a malfunction.

r Eye image capturing cameras

These cameras, which are located behind the front

panel, are used for eye image capturing.

Note: Avoid covering these cameras with a hand or

cloth, etc. Or avoid placing smudges on these cam-

eras. It may cause invalid recognition.

t Result indicators

These indicators inform you of recognition results.

ACCEPT: This indicator lights up when recognition is

successfully completed.

REJECT: This indicator lights up when recognition is

not successfully completed or the user's iris data is

not enrolled in the iris camera.

y Video surveillance camera

This colour camera, which is located behind the front

cover, is used for facial monitoring. If you connect this

camera to external equipment such as a digital disk

recorder, you can record user's face and surroundings

to check the capturing condition.

u Live indicator

This indicator is blinking during standby. The blinking

speeds up when a user stands where he/she can see

both eyes in the mirror and guidance starts. The indica-

tor can be set to be continuously on or off. Refer to sys-

tem administrators for details on the settings.

REJECT

i Speaker

This speaker outputs voice guidance that guides a

user's position and gives the recognition result. The

voice guidance can be set to any of the following. Refer

to system administrators for details on the settings.

Mute: Voice guidance is not output.

Simple: Shutter sound and recognition result are out-

put. Voice guidance is not output.

Full: Voice guidance, shutter sound, and recognition

result are output.

o Audio volume controller

This controller adjusts the audio level of voice guid-

ance. For adjustment, use a Phillips screwdriver that is

3 mm {0.12 in.} in diameter and more than 25 mm {0.98

in.} long. It is recommended to use a non-conductive

driver.

Note: Avoid adding excessive force to the screwdriver.

That may damage the audio volume controller.

!0 Tilt handles

You can adjust the angle of the front panel by holding

these handles. Adjust the handles so as to position both

eyes at the centre of the mirror.

!1 Front cover

This cover is removed at the time of installation, con-

nection or maintenance. Users should not open it.

(Refer to service personnel when the front cover needs

to be opened.)