Panasonic BM-ET330 사용 설명서 - 페이지 28

{카테고리_이름} Panasonic BM-ET330에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic BM-ET330 37 페이지. Iris reader

■ How to Carry out Recognition

The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out

recognition. This document will explain about:

• Recognition by an iris reader only

• Recognition by an iris reader and a card reader

Notes:

• To carry out the recognition by an iris reader only, your iris data needs to have been sent to recognition iris readers,

enrolled in the iris server, or written into a card. If your iris data has not been enrolled, refer to system administrators for

enrollment.

• Depending on the settings by the system administrators, voice guidance (voice guidance and/or shutter sound) may not

be output.

● Recognition by an Iris Reader only

Stand (Sit down) in front of the iris reader.

Follow the directions by system administrators or operators.

Move your face so as your eyes are positioned within 50 cm

{1.64 ft.} from the iris reader.

• The voice guidance will say, "Please look into the mirror."

• The guide indicator or voice guidance will start.

Position your eyes in the mirror by referring to " How to Position Your Eyes in the Mirror" (pp. 23 to

25).

Move your position slowly by following the guide indicator or

voice guidance.

• When the distance between the iris reader and you is too great, the

voice guidance will say, "Please move a little closer."

• When the distance between the iris reader and you is too short, the

voice guidance will say, "Please move back a little."

• When your position is right-of-centre, the voice guidance will say,

"Please move to the left a little."

• When your position is left-of-centre, the voice guidance will say,

"Please move to the right a little."

During the guidance, the near-infrared light will blink.

Keep your eyes opened widely during the guidance.