Panasonic CF-U1 series 추가 지침 매뉴얼 - 페이지 5
{카테고리_이름} Panasonic CF-U1 series에 대한 추가 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CF-U1 series 12 페이지. Supplementary instructions for hspa modem
Panasonic CF-U1 series에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 추가 지침 매뉴얼 (12 페이지), 추가 지침 매뉴얼 (8 페이지), 추가 지침 매뉴얼 (17 페이지), 추가 정보 (25 페이지)
페이지 인쇄
The reader can still read a barcode even if the barcode is not in the center of the red LED
light. However, if a part of the barcode lies slightly outside the LED light, the barcode
cannot be read. Make sure the entire barcode is inside the LED light.
Troubleshooting
Reading is not possible.
Cleaning the Reading Window
If the reading window is dirty, gently wipe the reading window with a cloth or a cotton swab
moistened with water.
Do not allow materials that can easily scratch the reading window to touch the window, such
as sandpaper or metal object. In addition, do not directly apply a liquid such as water, deter-
gent, or alcohol, on the surface of the window.
For parts other than the reading window, please read "Maintenance" in the Personal Com-
puter Operating Instructions.
Right
LED light
Confirm that the barcode is readable (without damage,
etc.).
Confirm the range for reading.
Be sure the reader is programmed to read the type of
barcode you are reading.
The distance from the reader to the barcode is impor-
tant. As a rule of thumb, a farther distance should be
used for a larger symbol to allow the raster pattern to
cover the symbol. In addition, a closer distance should
be used for a thinner symbol.
Return the Barcode reader to the default setting.
Wrong
5