Panasonic CF-U1 series 추가 지침 매뉴얼 - 페이지 5

{카테고리_이름} Panasonic CF-U1 series에 대한 추가 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CF-U1 series 8 페이지. Supplementary instructions for hspa modem
Panasonic CF-U1 series에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 추가 지침 매뉴얼 (12 페이지), 추가 지침 매뉴얼 (12 페이지), 추가 지침 매뉴얼 (17 페이지), 추가 정보 (25 페이지)

페이지 인쇄

Troubleshooting

Cannot

communicate.

<When using the

GPS function on

the model with

the built-in HSPA

modem>

GPS data is not

output when

the computer

resumes from the

sleep

standby or

hibernation.

Cannot connect

to the mobile

broadband

network.

• <Except for CF-H1 series>

Confirm that wireless switch is in ON.

• Confirm that [Wireless WAN] is set to [Enabled] in the

[Advanced] menu of the Setup Utility.

• Use the Wireless Switch Utility and confirm that the

wireless WAN is on.

• Confirm that the SIM card is inserted correctly.

If communication is not established after proceeding with

the above remedies, the wireless WAN device may not be

correctly recognized. Restart the computer.

• If the computer has entered the

GPS port is open on the map software, GPS data may not

be output when the computer resumes. If the computer

has entered the

standby or hibernation mode while the GPS port is open

on the map software, close the GPS port on the map

software and open it again after the computer resumes.

When you connect to the mobile broadband network for the

first time, proceed as follows.

A Click

to open [Connect to a Network], select [Mobile

Broadband Network] and then click [Connect].

A message appears to show that connection has failed.

B Right-click [Mobile Broadband Network] and select

[Properties].

C Set the APN, user name and password.

D Repeat step A.

standby or hibernation mode while the

sleep /