Panasonic CF-U1 series 추가 정보 - 페이지 18
{카테고리_이름} Panasonic CF-U1 series에 대한 추가 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CF-U1 series 25 페이지. Supplementary instructions for hspa modem
Panasonic CF-U1 series에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 추가 지침 매뉴얼 (12 페이지), 추가 지침 매뉴얼 (12 페이지), 추가 지침 매뉴얼 (8 페이지), 추가 지침 매뉴얼 (17 페이지)
페이지 인쇄
Barcode Configuration Utility
Applying the settings
To apply the settings for the Barcode Configuration Utility, follow the steps below.
1
Click [File]-[Save as] to create a configuration file (*.ini).
Name the configuration file (*.ini).
2
To reflect the setting contents to the Barcode module, click [Tools]-[Apply Configuration].
3
Restart the computer.
NOTE
Alternatively you can reflect the setting contents to the Barcode module in the following procedures.
Create and save the configuration file in Barcode Configuration Utility.
A
Apply the configuration file in the following procedures.
B
<For model with 1D Barcode Reader>
Input [c:\Program Files\Panasonic\bcr1d_set\bcr1d_set.exe x:\xxxxxxxx\xxxxxxxx.ini
[OK].
<For model with 2D Barcode Reader>
Input [c:\Program Files\Panasonic\bcr2d_set\bcr2d_set.exe x:\xxxxxxxx\xxxxxxxx.ini
[OK].
Restart the computer.
C
*1
Drive name, folder name and file name for configuration file.
After applying, the settings occur either in the Barcode module or the Barcode Key Emulator. You do not need to oper-
ate the 1D/2D Barcode Setting Utility every time when you restart the computer.
18
*1
] in [start] - [Run] and click
*1
] in [start] - [Run] and click