Diamond H2O Reliant DRS4-EM-24 매뉴얼 - 페이지 13
{카테고리_이름} Diamond H2O Reliant DRS4-EM-24에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond H2O Reliant DRS4-EM-24 19 페이지. Reliant drs4 series single tank water softener
페이지 인쇄- 1. Table of Contents
- 2. Place the Tanks Near a Water Source
- 3. Setting up the Tank
- 4. Connect the Brine Tank
- 5. Connect the Valves to the Water Source
- 6. Electrical
- 7. Start up the System for the First Time
- 8. Bypass Valve Operations
- 9. Main Operating States
- 10. Program the Valve
- 11. Troubleshooting
- 12. System Specifications
- 13. Error Codes
Parameter
Description
P4
Set Calendar
Override
P6
Set Amount of
Regenerant
P7
Estimated
Capacity
P8
Hardness
Table 3: Level I Programming (2).
Range of
Minimum
Values
Increment
0-99
1
S, H, L
N/A
N/A
N/A
0-99
1
Default Units of
Measure
0
days
S
N/A
kg
25
Grains per
gallon
Notes
0 = no calendar override,
0.5 = regeneration twice a day
at time of regeneration and 12
hours later.
Calendar Override skipped if at
least one Day of Regeneration
selected. Can be locked out of
changes in Level I programming.
3
S – Standard (9lbs/ft
3
H – High (15lbs/ft
resin)
3
L – Low (3lbs/ft
resin)
Lower salt settings are more
efficient, but will regenerate
more often.
Cannot be changed
Displays calculated capacity
(based on volume of resin used)
Sets Water hardness level
This value is used to calculate
estimated capacity
resin)
pg. 12