Panasonic DMC-FS42 Lumix 기본 사용 설명서 - 페이지 6

{카테고리_이름} Panasonic DMC-FS42 Lumix에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FS42 Lumix 28 페이지. Información básica instrucciones de funcionamiento cámara digital
Panasonic DMC-FS42 Lumix에 대해서도 마찬가지입니다: 기본 사용 설명서 (34 페이지), 기본 사용 설명서 (24 페이지), (영어) 사용 설명서 (26 페이지)

Panasonic DMC-FS42 Lumix 기본 사용 설명서
• If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-
AC5E: optional). Then reinsert the battery or reconnect AC adaptor and turn the camera
on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures and
sound may be adversely affected.
Care of the camera
• Do not strongly shake or bump the camera by dropping it etc.
This unit may malfunction, recording pictures may no longer be possible or the lens or
the LCD monitor may be damaged.
• We strongly recommend you do not leave the camera in your trousers pocket when you
sit down or forcefully insert it into a full or tight bag etc.
Damage to the LCD monitor or personal injury may result.
• Be particularly careful in the following places as they may cause this unit to
malfunction.
– Places with a lot of sand or dust.
– Places where water can come into contact with this unit such as when using it on a
rainy day or on a beach.
• Do not touch the lens or the sockets with dirty hands. Also, be careful not to
allow liquids, sand and other foreign matter to get into the space around the lens,
buttons etc.
• If water or seawater splashes on the camera, use a dry cloth to wipe the camera
body carefully.
About Condensation (When the lens is fogged up)
• Condensation occurs when the ambient temperature or humidity changes. Be careful of
condensation since it causes lens stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.
6
VQT2B55 (ENG)