Panasonic DMC-FT2 기본 사용 설명서 - 페이지 20
{카테고리_이름} Panasonic DMC-FT2에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FT2 36 페이지. Brochure
Panasonic DMC-FT2에 대해서도 마찬가지입니다: 기본 사용 설명서 (40 페이지), 브로셔 (2 페이지)
페이지 인쇄
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on:
The [CHARGE]
indicator turns off:
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 ºC to 35 ºC.
–
The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
Charging time
∫ Approximate operating time and number of recordable pictures
Number of recordable pictures
Recording time
Playback time
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].
•
Normal Picture Mode
•
Temperature: 23 oC/Humidity: 50% when LCD monitor is on.
•
Using a Panasonic SD Memory Card (32 MB).
•
Using the supplied battery.
•
Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [AUTO].)
•
Recording once every 30 seconds with full flash every second recording.
•
Changing the zoom magnification from Tele to Wide or vice versa in every
recording.
•
Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
20
VQT2M46 (ENG)
The [CHARGE] indicator
charging will start.
The [CHARGE] indicator
off once the charging has completed without any
problem.
is turned on and
A
of the charger will turn
A
Approx. 130 min
Approx. 360 pictures
Approx. 180 min
Approx. 300 min