HP 10508 데이터시트 - 페이지 2

{카테고리_이름} HP 10508에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 10508 20 페이지. 10500 series
HP 10508에 대해서도 마찬가지입니다: 사양 (42 페이지)

HP 10508 데이터시트
Data sheet | HP 10500 Switch Series
2

Features and benefits

Product architecture

Brings native high stability, independent process monitoring, and restart through the modular
design and multiple processes of HP Comware v7 software; allows individual software modules
to be upgraded for higher availability; and supports enhanced serviceability functions
• In-service software upgrade
Provides an upgrade of the entire chassis or an individual task or process, with zero packet
loss
• Distributed architecture with separation of data and control planes
Delivers enhanced fault tolerance and facilitates continuous operation and zero service
disruption during planned or unplanned control-plane events
NEW
Multitenant device context
Virtualizes a physical switch into multiple logical devices, with each logical switch having its
own processes, configuration, and administration
Performance
• High-speed fully distributed architecture
Provides up to 11.52 Tb/s switching capacity with released line cards and up to 13.72 Tb/s
switching fabric capacity with type-D fabric; leverages its modules to provide non-blocking
wire-speed 10GbE/40GbE performance and future 100GbE expansion capability; utilizes four
fabrics to deliver up to 8.571 billion pps throughput; performs all switching and routing in the
I/O modules; and meets the demand of bandwidth-intensive applications today and in the
future
• Scalable system design
Provides investment protection to support future technologies and higher-speed connectivity
with a backplane designed to accommodate bandwidth increases
• Flexible chassis selection
Enables you to tailor product selections to your budget with a choice of four chassis: the
10504 switch (four open module slots), 10508 switch (eight open module slots), 10508-V
switch (eight vertical open module slots), and 10512 switch (12 open module slots)
Connectivity
• High-density port connectivity
Offers up to 12 interface module slots; provides up to 96 40GbE ports, 576 10GbE ports, and
576 gigabit fiber/electrical ports per system
• Jumbo frames
Allows high-performance backups and disaster-recovery systems; and provide a maximum
frame size of 9k bytes
• Loopback
Supports internal loopback testing for maintenance purposes and an increase in availability;
loopback detection protects against incorrect cabling or network configurations and can be
enabled on a per-port or per-VLAN basis for added flexibility
• Ethernet operations, administration, and maintenance (OAM)
Detects the data link layer problems that occur in the "last mile," using the IEEE 802.3ah OAM
standard; and monitors the status of the link between two devices