HP 12500 Series 명령 참조 매뉴얼 - 페이지 10
{카테고리_이름} HP 12500 Series에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 12500 Series 34 페이지. 20gbps vpn firewall module
HP 12500 Series에 대해서도 마찬가지입니다: 데이터시트 (8 페이지)
페이지 인쇄Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed MAD information. If this keyword is not provided, the command only
displays whether a MAD mechanism is enabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD LACP disabled.
MAD BFD disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
GigabitEthernet 2/1/0/2
GigabitEthernet 2/1/0/3
Excluded ports(can not be configured):
Ten-GigabitEthernet 1/2/0/25
Ten-GigabitEthernet 2/2/0/26
MAD enabled aggregation port:
Bridge-Aggregation2
MAD BFD enabled interface:
Vlan-interface10
mad ip address 10.0.0.2 255.255.0.0 member 1
mad ip address 10.0.0.3 255.255.0.0 member 2
Table 5 Command output
Field
Current MAD status
Description
MAD status:
•
Detect—The IRF fabric is integrated.
•
Recovery—IRF fabric is in Recovery state. When detecting a
multi-active collision, MAD places the IRF fabric with higher master
ID in Recovery state and shuts down all physical ports in the fabric
but IRF physical ports and ports that are configured to not shut
down.
•
Detect to Recovery—State of the IRF fabric is transitioning from
Detect to Recovery, for example, as the result of an IRF split.
•
Recovery to Detect—State of the IRF fabric is transitioning from
Recovery to Detect.
7