HP 12500 Series 명령 참조 매뉴얼 - 페이지 29
{카테고리_이름} HP 12500 Series에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 12500 Series 34 페이지. 20gbps vpn firewall module
HP 12500 Series에 대해서도 마찬가지입니다: 데이터시트 (8 페이지)
페이지 인쇄Examples
# Enable LACP MAD on Bridge-Aggregation 1, a Layer 2 dynamic aggregate interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] mad enable
You need to assign a domain ID (range: 0-4294967295)
[Current domain is: 0]: 1
The assigned
MAD LACP only enable on dynamic aggregation interface.
mad exclude interface
Use mad exclude interface to exclude a physical network port from being shut down when the IRF
fabric transitions to the Recovery state upon detection of a multi-active collision.
Use undo mad exclude interface to restore the default MAD action on a physical network port.
Syntax
mad exclude interface interface-type interface-number
undo mad exclude interface interface-type interface-number
Default
All physical network ports but the IRF physical ports and console port shut down when the IRF
fabric transitions to the Recovery state.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
MAD action is not configurable for IRF physical ports.
When MAD detects that an IRF fabric has split into two or more identical active IRF fabrics, only the
IRF fabric whose master has the lowest member ID among all the masters can still forward data
traffic. MAD changes its status to Recovery on all the other IRF fabrics and shuts down all their
physical ports except the physical IRF ports and those manually configured to not shut down.
If a port must be kept in up state for special purposes such as Telnet connection, exclude it from
the shutdown action. To avoid problems, HP recommends excluding only the one used for Telnet
for the management purpose.
The ports that have shut down by MAD come up when the member devices reboot to join the
recovered IRF fabric. If auto recovery fails because the current master fails or any other exception
occurs, use the mad restore command to manually recover the member devices and bring up the
ports.
domain ID is: 1
26