HP 12500 Series 명령 참조 매뉴얼 - 페이지 7

{카테고리_이름} HP 12500 Series에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 12500 Series 34 페이지. 20gbps vpn firewall module
HP 12500 Series에 대해서도 마찬가지입니다: 데이터시트 (8 페이지)

페이지 인쇄

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Examples

# In standalone mode, display the basic IRF settings of the device.

<Sysname> display irf configuration

MemberID Priority IRF-Port1

# In IRF mode, display all members' basic IRF settings.

<Sysname> display irf configuration

MemberID

Table 2 Command output

Field

MemberID

Priority

NewID

IRF-Port1

IRF-Port2

display irf link

Use display irf link to display IRF link information, including IRF ports, physical IRF ports, IRF link

status, and the MDC to which each physical port belongs.

Syntax

display irf link

Views

Any view

disable

NewID

IRF-Port1

Ten-GigabitEthernet1/8/0/1

Ten-GigabitEthernet1/8/0/2

disable

Description

Current member ID of the device.

If no member ID is assigned, this field displays two hyphens (--).

Member priority.

This field is displayed only when the device is operating in standalone mode.

Member ID assigned to the device. This member ID takes effect at reboot.

This field is displayed only when the device is operating in IRF mode.

Physical ports bound to IRF-port 1. The bindings take effect at reboot.

If no physical port is bound to the IRF port, this field displays disable.

Physical ports bound to IRF-port 2. The bindings take effect at reboot.

If no physical port is bound to the IRF port, this field displays disable.

IRF-Port2

disable

IRF-Port2

disable

Ten-GigabitEthernet2/8/0/1

Ten-GigabitEthernet2/8/0/2