HP 1405-8 설치 및 시작하기 매뉴얼 - 페이지 38

{카테고리_이름} HP 1405-8에 대한 설치 및 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1405-8 45 페이지. 1405 switch series
HP 1405-8에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 설치 및 시작하기 매뉴얼 (44 페이지)

페이지 인쇄

1. Switch Features

N o t e

Crossover Twisted-Pair Cable for

10 Mbps or 100 Mbps Network Connection

The Auto-MDIX operation of the 10/100 ports on the switch also allows you to

use crossover cables for all network connections, to PCs, servers or other end

nodes, or to hubs or other switches.

If any of these ports are given a fixed configuration, for example 100 Mbps/

Full Duplex, the ports operate as MDI-X ports, and crossover cables must be

then used for connections to hubs or switches or other MDI-X network

devices.

Cable Diagram

Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 3 and 6

on connector "B".

Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 1 and 2

on connector "B".

Pins 4, 5, 7, and 8 are not used in this application, although they may be wired

in the cable.

Pin Assignments

Switch End (MDI-X)

Signal

Pins

receive +

receive -

transmit +

transmit -

Twisted-Pair Cable/Connector Pin-Outs

Hub or Switch Port, or Other

MDI-X Port End