HP 1410 series 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} HP 1410 series에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1410 series 5 페이지. Hp 1410 switch series
HP 1410 series에 대해서도 마찬가지입니다: 사양 (33 페이지), 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄

Install the Switch Hardware (Continued)

Wall (or Under-Table): A hardware kit for wall-mounting (or

under-table mounting) is included. Use a #1 Phillips (cross-

head) screwdriver and the 20-mm M4 tap screws (included).

For screw positions, see the mounting hole dimensions on

page 4. (Under-Table: After installation, a third screw may be

used to prevent switch movement.)

For wall-mounting, the network ports may face up or down.

Do not mount the switch with ventilation ducts facing up or

down. (See "Safety Precautions" on page 3.)

Rack Mounting: A special rack-mounting kit is included. Use a #1 Phillips (cross-head) screwdriver to attach the special

brackets to the switch using the eight 8-mm M4 screws. Then use the four number 12-24 screws to secure the brackets to the

rack.

(Optional) Lock the Switch. Use a Kensington lock or similar device (not included) to physically secure the switch.

. Power On the Switch.

Use the cable tie strap to secure the connection.

. Connect Network Cables.

Cable tie strap

M-4 tap

screws

Ventilation