HP 1810 series 사양 - 페이지 30

{카테고리_이름} HP 1810 series에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1810 series 32 페이지. Smart-managed, fixed-configuration gigabit and fast ethernet layer 2 switches
HP 1810 series에 대해서도 마찬가지입니다: 빠른 사양 (32 페이지), 데이터시트 (11 페이지)

HP 1810 series 사양
QuickSpecs
Accessory Product Details
HP X410 1U Universal 4-
post Rack Mounting Kit
(J9583A)
HP X111 100M SFP LC FX
Transceiver (J9054C)
HP X111 100M SFP LC FX
Transceiver: An SFP format
100-megabit transceiver
with LC connectors using
FX technology.
Notes
Services
Ports
Physical characteristics
Environment
Cabling
Notes
Services
DA - 13447 Worldwide — Version 18 — January 17, 2014
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520 Series,
E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power
Supply This universal rack mounting kit is design to fit the following racks: HP
10K 10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC
Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other
brands and models too.
Refer to the HP website at
www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9054B 100-FX SFP-LC
Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
Refer to the HP website at
www.hp.com/networking/services
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
HP 1810 Switch Series
for details on
for details on the
Page 30