HP 1910-8-PoE+ 시작하기 매뉴얼 - 페이지 25
{카테고리_이름} HP 1910-8-PoE+에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1910-8-PoE+ 26 페이지. 1910 switch series
HP 1910-8-PoE+에 대해서도 마찬가지입니다: 빠른 사양 (43 페이지), 데이터시트 (16 페이지), 빠른 사양 (44 페이지)
페이지 인쇄
Appendix C LED description
Power LED
The power LED shows the operation status of the switch.
Table 6 Power LED description
LED mark
Power
Ethernet copper port LEDs
Table 7 Ethernet copper port LED description
LED mark
10/100BAS
E-T port
Link/Ac
t
10/100/10
00BASE-T
port
SFP transceiver module link LED
Table 8 SFP transceiver module LED description
LED mark
SFP transceiver module
link LED
Status
Description
Steady green
The switch is operating properly.
Flashing green
The system is performing power-on self test (POST).
Off
The switch has been powered off or the power supply failed.
Status
Description
Steady green
The port is operating at 10/100 Mbps.
Flashing green
The port is sending or receiving data at 10/100 Mbps.
Off
No link is present on the port.
Steady green
The port is operating at 1000 Mbps.
Flashing green
The port is sending or receiving data at 1000 Mbps.
Steady yellow
The port is operating at 10/100 Mbps.
Flashing yellow
The port is sending or receiving data at 10/100 Mbps.
Off
No link is present on the port.
Status
Description
Steady yellow
The port is operating at 100 Mbps.
Flashing yellow
The port is sending or receiving data at 100 Mbps.
Steady green
The port is operating at 1000 Mbps.
Flashing green
The port is sending or receiving data at 1000 Mbps.
Off
No link is present on the port.
1