HP 3020 - Cisco Catalyst Blade Switch 설정 포스터 - 페이지 4
{카테고리_이름} HP 3020 - Cisco Catalyst Blade Switch에 대한 설정 포스터을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 3020 - Cisco Catalyst Blade Switch 9 페이지. Cisco catalyst blade switch 3020 for hp getting started guide
HP 3020 - Cisco Catalyst Blade Switch에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 시작하기 매뉴얼 (11 페이지)
페이지 인쇄
B. Install the components
Before installing front or rear components into the enclosure, review enclosure bay
numbering for each component.
Install any options, such as processor, memory, mezzanine card, or hard drive,
into each blade.
Based on the total number ordered and the planned configuration, install the
following components:
•
Blades
Onboard Administrator modules
•
Power supplies
•
•
Active cool fans
For installation instructions, see the appropriate enclosure setup and installation
guide.
C. Connect the Onboard Administrator module
cabling
Use the appropriate cables to connect each installed Onboard Administrator
module to the external connections. The connectors on the Onboard Administrator
module provide a connection to the iLO management network and the capability
to link multiple enclosures.
IMPORTANT:
there must be an Ethernet connection from the Onboard
Administrator module to the external management network.
For information on Onboard Administrator module cabling,
see the HP BladeSystem Onboard Administrator User
Guide.
D. Install the interconnect modules and connect
cabling
Install the interconnects based on the type of fabric in the configuration and the
planned installation location of each mezzanine card. Use the appropriate cables
to connect each installed interconnect module to the network.
E. Power up the enclosure
Connect the AC or DC power cables, depending on the power configuration.
When the circuit breakers are powered, the enclosure and HP BladeSystem Insight
Display have power. By default, each installed component also powers up.
Examine the HP BladeSystem Insight Display for any errors which may prevent
installed components from powering up.
For proper management of enclosure devices