HP 316095-B21 - StorageWorks Edge Switch 2/24 릴리스 노트 - 페이지 23

{카테고리_이름} HP 316095-B21 - StorageWorks Edge Switch 2/24에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 316095-B21 - StorageWorks Edge Switch 2/24 25 페이지. Edge switch release notes
HP 316095-B21 - StorageWorks Edge Switch 2/24에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 매뉴얼 (41 페이지), 매뉴얼 (40 페이지), 릴리스 노트 (32 페이지), 릴리스 노트 (27 페이지), 매뉴얼 (26 페이지), 릴리스 노트 (27 페이지), 설치 지침 매뉴얼 (24 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (19 페이지), 릴리스 노트 (19 페이지), 릴리스 노트 (18 페이지), 사용 설명서 (17 페이지), 릴리스 노트 (17 페이지), 업그레이드 지침 (16 페이지), 사용 설명서 (16 페이지), 설치 지침 매뉴얼 (16 페이지), 릴리스 노트 (16 페이지), 릴리스 노트 (17 페이지), 릴리스 노트 (17 페이지), 릴리스 노트 (11 페이지)

SNMP traps are not displayed in the Event Log

SNMP traps that are sent through a ﬁrewall are not displayed in the Event Log.

Disconnected ISL may not generate Event Log entry

Log entries are not generated when a link between switches is disconnected.

Connection offline and Connection online events are not created in the

Master Log.

Cannot export to disk on remote AIX client

An exception is occurring when an export to disk operation is performed on a remote

AIX client platform.

Errors drop down list is not available

The Errors list is not available in the Performance Graph for HAFM 08.06.00.

Cannot conﬁgure a blank nickname

Nicknames cannot be left blank. If no nickname has been conﬁgured yet, the user can

select cancel to leave a nickname blank. Once a nickname has been conﬁgured, it

cannot be changed to be blank, that is, the nickname cannot be deleted. The nickname

can be assigned a new name.

Support for speed Auto-Negotiate

Auto-negotiate is supported. However, HP recommends that the port speed for E_Ports

(for Interswitch Links, or ISLs) be set to a speciﬁc port speed (1Gb/sec or 2Gb/sec, as

appropriate for the speed of the Directors or Edge Switches being connected) instead

of to Negotiate. Using a speciﬁc port speed decreases the time for a fabric build in

response to some perturbation event in the fabric. Similarly, setting a speciﬁc port speed

for N_Ports also decreases fabric build time. However, setting a speciﬁc port speed for

N_Ports is not required.

There are a few older HBA devices that do not always succeed in logging in to a switch

port when the port speed is set for auto-negotiate.

Workaround

If an older HBA has difﬁculty logging into a switch port that has its port speed

conﬁgured as Negotiate, conﬁgure that port speed to 1Gb/sec or 2Gb/sec according to

the operation speed of the HBA connected to that port.

HA-Fabric Manager release notes